Manure-based All in One Spawn and substrate-ready mushroom grow bag for colonisation and fruiting: Pre-sterilised for mushroom cultivation-now comes with detailed Instruction sheet.
It is not recommended to buy this product until you have a spore syringe or liquid culture. This product is intended to be inoculated upon arrival.
We have 4 Variations for this bag: This listing is for Manure based All in One; use our other listing to buy All In One Bags
GENERAL ITEM DESCRIPTION
The bags are assured 100% contaminant-free due to their sterilization process of 3 hours at 20 psi in a commercial autoclave. Under certain circumstances, contamination can still occur, which could have occurred while the product was being shipped. In the unlikely event that you see contamination in your bag that may be due to shipping, please send us a photo within 2 weeks of receiving the item for a full refund or replacement.
Your bags are made to order; please allow 2 to 3 days of handling time.
We recommend that the bags are used as soon as possible to minimise the chances of contamination.
Approximate weight- 1kg
KEY ITEM FEATURES
Fruit Straight from the bag!
Your kit includes:
50% Reputable millet grains (Sterile and prepared at field capacity)
50 % Substrate (Cow Manure+ Coco coir+vermiculite+Gypsum)
Manure is directly sourced from a farm in NSW and has aged for over a year
Instructions sheet provided with every order
1x Self-healing injection port
Alcohol swab
Bag Size: 10.16cmX 7.62cmX 45.72cm
Filter Size: 3.81cmX 3.81cm
Brand of the bag: Unicorn (4-T)
If 4-T bags are out of stock, we shall use 10-T bags instead. 10-T Size-12.7cmX 10.16cmX 45.72cm (Both have Inj ports).
There is no need for grain-to-substrate transfer, which often leads to contamination. It essentially removes one of the most contamination-prone steps out of the mushroom growing process, saving a lot of hassle.
Steps
The lower part of the bag consists of grains. Sanitise the injection port, flame the needle until red, let it cool, and then inject the grains through the injection port with 10cc Liquid culture or a completely sterile spore syringe.
Once inoculated, move the bag around without shaking. This helps the liquid to move around the bag and not settle at the bottom.
Keep the bag in a dry and dark spot at around 24°c in average.
Check the bag in one week or two when all the grains are colonised.
Simply take the bag and shake it to mix the substrate and grains together. Be careful not to strain the top of the bag, which has been heat-sealed.
Keep the bag again for a week in a dry and dark spot at 24°c.
Ready to fruit as per your mushroom species- Some are top fruiting, and others are side fruiting.
The recommended time frame for use once received is a maximum of 2 weeks.
FRUITING INSTRUCTIONS
To fruit from the side, just cut an x in the bag when fully colonised (See pictures)
To fruit from the top, just cut the top part of the bag where the seal is. Please leave some space on top to create a reservoir of C02. (See pictures)
Once fully colonised, these bags can be taken out of the mushroom bag and kept in a fruiting chamber.
It is not recommended to buy this product until you have a spore syringe or liquid culture. This product is intended to be inoculated upon arrival.
We have 4 Variations for this bag: This listing is for Manure based All in One; use our other listing to buy All In One Bags
GENERAL ITEM DESCRIPTION
The bags are assured 100% contaminant-free due to their sterilization process of 3 hours at 20 psi in a commercial autoclave. Under certain circumstances, contamination can still occur, which could have occurred while the product was being shipped. In the unlikely event that you see contamination in your bag that may be due to shipping, please send us a photo within 2 weeks of receiving the item for a full refund or replacement.
Your bags are made to order; please allow 2 to 3 days of handling time.
We recommend that the bags are used as soon as possible to minimise the chances of contamination.
Approximate weight- 1kg
KEY ITEM FEATURES
Fruit Straight from the bag!
Your kit includes:
50% Reputable millet grains (Sterile and prepared at field capacity)
50 % Substrate (Cow Manure+ Coco coir+vermiculite+Gypsum)
Manure is directly sourced from a farm in NSW and has aged for over a year
Instructions sheet provided with every order
1x Self-healing injection port
Alcohol swab
Bag Size: 10.16cmX 7.62cmX 45.72cm
Filter Size: 3.81cmX 3.81cm
Brand of the bag: Unicorn (4-T)
If 4-T bags are out of stock, we shall use 10-T bags instead. 10-T Size-12.7cmX 10.16cmX 45.72cm (Both have Inj ports).
There is no need for grain-to-substrate transfer, which often leads to contamination. It essentially removes one of the most contamination-prone steps out of the mushroom growing process, saving a lot of hassle.
Steps
The lower part of the bag consists of grains. Sanitise the injection port, flame the needle until red, let it cool, and then inject the grains through the injection port with 10cc Liquid culture or a completely sterile spore syringe.
Once inoculated, move the bag around without shaking. This helps the liquid to move around the bag and not settle at the bottom.
Keep the bag in a dry and dark spot at around 24°c in average.
Check the bag in one week or two when all the grains are colonised.
Simply take the bag and shake it to mix the substrate and grains together. Be careful not to strain the top of the bag, which has been heat-sealed.
Keep the bag again for a week in a dry and dark spot at 24°c.
Ready to fruit as per your mushroom species- Some are top fruiting, and others are side fruiting.
The recommended time frame for use once received is a maximum of 2 weeks.
FRUITING INSTRUCTIONS
To fruit from the side, just cut an x in the bag when fully colonised (See pictures)
To fruit from the top, just cut the top part of the bag where the seal is. Please leave some space on top to create a reservoir of C02. (See pictures)
Once fully colonised, these bags can be taken out of the mushroom bag and kept in a fruiting chamber.
* All products may not be available at all stores, countries and regions.
Social - Connect with us
Contact information
Rootlab
28/12-22 Newington RoadMARRICKVILLE, New South Wales 2204
Phone: +61416399905
Email us Visit our website
Our partners
Proudly supporting Australian Made Campaign and the strength of the logo
