4WD Rear Spare Wheel Carrier

Swing away rear 4WD spare wheel carrier is ideal to house spare tyres or a jerry can holder or a lift jack.
Australian Made

Carriers range from light duty to these heavy-duty 3t swing away carriers.

Carriers are available with and without stub axles.

Our high-quality spare wheel carriers are made from K1045 which is the same grade of material as the stub axle.

In this application, there is no requirement for high-speed bearings. We decided to manufacturer a more robust spare wheel carrier that could withstand applied stresses. The clearance between hub and stub is 0.02mm and requires greasing prior to insertion.

Firstly, thank you for visiting. You are supporting Australian workers like you, who make this product.


Carriers are generally fitted to the rear bars however heavier applications are used in industrial and commercial installations. I

Larger size bearings result in an increase in load capacity.

It is also necessary to thoroughly clean wheel or tyre carries prior to welding and powder coating.

Specifications

39mm Round Stub Holden Bearings
Inner ID 31.75mm, OD 59.10mm
Outer ID 19.05mm, OD 45.20mm
Seal ID 37.5mm, OD 59.10mm
Grease Cap 45.20mm

55mm OD HUB KIT
45mm Round Stub Ford Bearings
Inner ID 35.00mm, OD 59.10mm
Outer ID 22.00mm, OD 45.20mm
Seal ID 43.9mm, OD 59.10mm
Grease Cap 45.20mm

55mm OD HUB KIT
45mm Round Stub Parallel Bearings
Inner ID 35.00mm, OD 59.10mm
Outer ID 35.00mm, OD 59.10mm
Seal ID 43.9mm, OD 59.10mm
Grease Cap 63.00mm

45mm Square Axle Ford Bearings
Inner ID 35.00mm, OD 59.10mm
Outer ID 22.00mm, OD 45.20mm
Seal ID 43.9mm, OD 59.10mm
Grease Cap 45.20mm

55mm OD HUB KIT
45mm Square Axle Parallel Bearings
Inner ID 35.00mm, OD 59.10mm
Outer ID 35.00mm, OD 59.10mm
Seal ID 43.9mm, OD 59.10mm
Grease Cap 63.00mm

50mm Square Axle Ford Bearings
Inner ID 35.00mm, OD 59.10mm
Outer ID 22.00mm, OD 45.20mm
Seal ID 43.9mm, OD 59.10mm
Grease Cap 45.20mm

55mm OD HUB KIT
60mm Round Stub 2t or 3t Bearings
Inner ID 50mm, OD 89.96mm – HR30210
Outer ID 31.75mm, OD 61.95mm – 15123/15245
Seal ID 60.3mm, OD 89.96mm – 64607
Grease Cap OD 63mm – DC2
Loading rate depends on the length of swing-away you intend to use. The longer the arm, the more loading on the bearings.

Holden Trailer Rescue Spare Wheel Kit
Trailer Spare Wheel Rescue Kit – Slimline Bearings
2t Electric Drum Spare Wheel Rescue Kit
2t Disc Trailer Rescue Kit
Bolt-on Swingaway Kit

Heavy-duty spare wheel carriers contain no bearings. As a result, heavier loads are able to be swung from this weldable holder. Purchase heavy-duty models here.

Couplemate Trailer Parts sells only the best quality Swing Away Rear 4WD Spare Wheel Carrier and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon November 22, 2016. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.