Flat Lifting Slings

A Series Web Slings
SpanSet single ply flat slings are manufactured with reinforced eyes for greater durability:
• Wide load bearing surface to minimise damage to fragile loads
• Lightweight for enhanced manual handling safety
• Excellent strength to weight ratio
• Light and flexible for good access in awkward situations
• Certified to AS1353.1

B Series Web Slings
SpanSet 2 ply flat slings are manufactured with reinforced eyes for greater durability:
• Wide load bearing surface to minimise damage to fragile loads
• Lightweight for enhanced manual handling safety
• Excellent strength to weight ratio
• Light and flexible for good access in awkward situations
• Certified to AS1353.1

CS Series Web Slings
SpanSet 4 ply flat slings are manufactured with reinforced eyes for greater durability:
• Wide load bearing surface to minimise damage to fragile loads
• Lightweight for enhanced manual handling safety
• Excellent strength to weight ratio
• Light and flexible for good access in awkward situations
• Certified to AS1353.1

CS Series Heavy-Duty Flat Slings
• More lifting power due to four layers
• Heavy-duty flat sling 12 tonne up to 20 tonne
• No damage during lifting due to wide supporting surface
• Optional with loop or D-ring
• Optimum handling due to low weight
• Exceptional lateral strength.

D Series Single Ply Web Slings
SpanSet endless flat slings are manufactured with hi-tech webbing for greater durability:
• Wide load (up to 300mm) bearing surface to minimise damage to fragile loads
• Lightweight for enhanced manual handling safety
• Excellent strength to weight ratio
• Light and flexible for good access in awkward situations
• Conform to AS1353.1

Boat Slings
SpanSet boat slings are for use with travel lift cranes for a wide load bearing lifting surface to minimise damage to hulls etc. Chine pads are available for protection from extrusions and keels. We also have available a complete range of salt water resistant secutex polyurethane protective sleeves to enhance the life of the slings. The slings are generally supplied in 2 parts with finger joints near the middle for convenient rigging practices.
• Generally 300mm webbing width
• 10t capacity (20t in basket mode)
• Capacity can be increased by “ganging” (joining side by side)
• 3 and 4 finger joint configuration
• Engineered joining pin required
• Proof load tested to 196.2kN with certificate