• ALCOHOL-FREE
• ODOUR NEUTRALIZING
• NATURALLY DERIVED
READ THE LABEL BEFORE USE.
PROTECT-A-BED® FABRIC SANITIZER is a safe and effective way to kill bacteria and protect surfaces for up to 30 days*. It eliminates odour-causing bacteria and inhibits mould and mildew. Spraying PROTECT-A-BED® FABRIC SANITIZER will destroy bacteria on the treated surface. Allowing the spray to dry will also coat the surface with a microscopic protective layer for continuous protection. It is safe for use around children, pets and plants.
DIRECTIONS
PROTECT-A-BED® FABRIC SANITIZER is premixed and ready for use.
DO NOT DILUTE. Ensure the surface to be treated is clean and dry. Shake well and hold the container upright, approx. 200mm from the surface. Spray the entire surface area, making sure it is completely covered. Allow the surface to dry. Do not wipe dry as this will remove the coating prior to bonding. Reapply PROTECT-A-BED® FABRIC SANITIZER during your next weekly cleaning cycle. Do not mix with detergents or other chemicals. Surfaces remain protected for up to 30 days unless heavy abrasion occurs.
KEEP OUT OF REACH OF CHILDREN.
DO NOT USE ON THERAPEUTIC DEVICES. CAUTION
This product is for external use only. If accidentally swallowed contact the Poisons Information Centre on 131126. Should any irritation occur, discontinue use. Do not use on inflamed or broken skin.
STORAGE AND DISPOSAL
Store in original, tightly closed containers above 5°C and below 30°C in a secure area inaccessible to children. Do not reuse empty
containers. Instead, triple rinse and then recycle.
INGREDIENTS
3-(Trimethoxy silyl) propyldimethyloctadecyl ammonium chloride 0.75% w/w, Didecyldimethylammonium chloride < 0.10% w/w Alkyl dimethyl benzyl ammonium chloride (C12-16) < 0.10% w/w.
Meets or exceeds EN 1276, AOAC 991.47/48/49
• ODOUR NEUTRALIZING
• NATURALLY DERIVED
READ THE LABEL BEFORE USE.
PROTECT-A-BED® FABRIC SANITIZER is a safe and effective way to kill bacteria and protect surfaces for up to 30 days*. It eliminates odour-causing bacteria and inhibits mould and mildew. Spraying PROTECT-A-BED® FABRIC SANITIZER will destroy bacteria on the treated surface. Allowing the spray to dry will also coat the surface with a microscopic protective layer for continuous protection. It is safe for use around children, pets and plants.
DIRECTIONS
PROTECT-A-BED® FABRIC SANITIZER is premixed and ready for use.
DO NOT DILUTE. Ensure the surface to be treated is clean and dry. Shake well and hold the container upright, approx. 200mm from the surface. Spray the entire surface area, making sure it is completely covered. Allow the surface to dry. Do not wipe dry as this will remove the coating prior to bonding. Reapply PROTECT-A-BED® FABRIC SANITIZER during your next weekly cleaning cycle. Do not mix with detergents or other chemicals. Surfaces remain protected for up to 30 days unless heavy abrasion occurs.
KEEP OUT OF REACH OF CHILDREN.
DO NOT USE ON THERAPEUTIC DEVICES. CAUTION
This product is for external use only. If accidentally swallowed contact the Poisons Information Centre on 131126. Should any irritation occur, discontinue use. Do not use on inflamed or broken skin.
STORAGE AND DISPOSAL
Store in original, tightly closed containers above 5°C and below 30°C in a secure area inaccessible to children. Do not reuse empty
containers. Instead, triple rinse and then recycle.
INGREDIENTS
3-(Trimethoxy silyl) propyldimethyloctadecyl ammonium chloride 0.75% w/w, Didecyldimethylammonium chloride < 0.10% w/w Alkyl dimethyl benzyl ammonium chloride (C12-16) < 0.10% w/w.
Meets or exceeds EN 1276, AOAC 991.47/48/49
* All products may not be available at all stores, countries and regions.
Social - Connect with us
Our partners
Proudly supporting Australian Made Campaign and the strength of the logo
