A Very High Viscosity Epoxy Resin, designed for coating and creative applications.
An easy to measure 1:1 ratio self-leveling product, with excellent air release properties, has great HAL's UV Stability, low in VOC’s and in odour.
This product has been designed with Resin Art Ocean Pours in mind!
OceanCote is great for lacing & cell effects.
Can be applied by pouring, brushing on, or with a roller to substrates such as Art Boards, MDF, acrylic sheet, concrete, metal, wood and more.
Can be tinted with JustResin Pigment Pastes, Powders, Glitters and Inks.
Measure equal parts by volume (eg, 100mls : 100mls)
Mix for 3 minutes, or until combined, scraping sides and bottom of vessel
Open time of approx. 80mins at 25 degrees Celsius
24 hour cure time
Full cure at 7 days
A 2L kit includes 1L of Part A and 1L of Part B
Proudly Made in Australia
An easy to measure 1:1 ratio self-leveling product, with excellent air release properties, has great HAL's UV Stability, low in VOC’s and in odour.
This product has been designed with Resin Art Ocean Pours in mind!
OceanCote is great for lacing & cell effects.
Can be applied by pouring, brushing on, or with a roller to substrates such as Art Boards, MDF, acrylic sheet, concrete, metal, wood and more.
Can be tinted with JustResin Pigment Pastes, Powders, Glitters and Inks.
Measure equal parts by volume (eg, 100mls : 100mls)
Mix for 3 minutes, or until combined, scraping sides and bottom of vessel
Open time of approx. 80mins at 25 degrees Celsius
24 hour cure time
Full cure at 7 days
A 2L kit includes 1L of Part A and 1L of Part B
Proudly Made in Australia
* All products may not be available at all stores, countries and regions.
Social - Connect with us
Our partners
Proudly supporting Australian Made Campaign and the strength of the logo
