Alderdice Bore Pumps have flush caps enabling them to be lowered or raised from the bore without fouling.
The barrel is made from 3.3mm thick brass tubing, the cast components are made of Gunmetal Bronze.
The bottom cap has a nitrile faced valve. The plunger has two leather cup buckets and a solid valve (standard), a nitrile faced valve can be fitted at extra cost.
Also Nitrile Buckets are available at extra cost.
The top and bottom caps are sealed into the barrel with "O" rings.
The barrel is made from 3.3mm thick brass tubing, the cast components are made of Gunmetal Bronze.
The bottom cap has a nitrile faced valve. The plunger has two leather cup buckets and a solid valve (standard), a nitrile faced valve can be fitted at extra cost.
Also Nitrile Buckets are available at extra cost.
The top and bottom caps are sealed into the barrel with "O" rings.
Where to buy
03 5562 2014
Direct From Manufacturer
Alderdice Brassfounders Pty Ltd
84 Henna Street
WARRNAMBOOL, Victoria 3280
Where available
Country
* All products may not be available at all stores, countries and regions.
Contact information
Alderdice Brassfounders Pty Ltd
Phone: 03 5562 2014
Fax: 03 5562 8034
Email us Visit our website
Our partners
Proudly supporting Australian Made Campaign and the strength of the logo
Share